Case Study
CASE STUDY 12 | UWA Nitrogen Testing Equipment Install
NPS recently installed Nitrogen testing equipment at the UWA School of Agriculture and Environment – Soil Science Department. The nitrogen line services bespoke pressure chambers in the university laboratory which ultimately measures soil water retention for applications in land capabilities and soil health. Application for soil water retention curves is most often used in land [...]
CASE STUDY 11 | Groundbreaking Mining Solutions
Groundbreaking Mining Solutions selected NPS to design, supply and install a compressed airline system for their new workshop in Forestdale, Western Australia.
CASE STUDY 10 | Restoration Makeover
From rags to riches, check out this before and after compressor restoration provided by NPS technician Leigh Knight!
CASE STUDY 9 | Low Hour Compressors Still Need Servicing
Nessco Pressure Systems recently attended a call out from a local Perth business whose screw compressor had broken down. NPS had never previously worked with this company before and the compressor had never been serviced before. Low hour compressors still need servicing and upon further inspection, the NPS service technician clearly diagnosed the issue as [...]
CASE STUDY 8 | NPS Slices Energy Costs at D’Orsogna
Local legends D’Orsogna, synonymous with high-quality flavoursome meat products came to Nessco Pressure Systems with concerns over air quality, pressure loss and electricity bills. Like most leading food and beverage wholesalers and manufacturers, their factory relies heavily on compressed air. NPS undertook an Air Audit, mapping D’Orsogna’s airline and recording the current four compressors’ operating [...]
CASE STUDY 7 | Torkan Packaging
Nessco Pressure Systems has regularly maintained and serviced Torkan Packaging’s compressors for many years. Recently, Torkan Packaging came to NPS with the ever-growing concern of rising energy costs and expensive monthly power bills, as many other Western Australians have also experienced. They had recently installed solar panels and were looking to save some money on [...]
CASE STUDY 6 | Global Supplier for Oil and Gas Industry
Our team here at NPS was asked to replace an old air receiver at a WA warehouse, Our Client is a leading global supplier of distinguished consumable and capital products for the mining, freight rail, and oil & gas industry. This installation required careful planning and designing by our Nessco Pressure Systems representative, Dillon Smith, [...]
CASE STUDY 5 | United Welding Force
United Welding Force selected NPS to design, supply and install a compressed airline system for their new workshop in Welshpool. United Welding Force specialises in providing fabrication services for the mining, industrial and commercial construction sectors; from drafting and fabrication, to surface treatment and transportation. Our Business Development Manager, Dillon Smith, visited their new 70m [...]
CASE STUDY 3 | Iconic Perth Manufacturer
A project management company on behalf of an Iconic Perth Manufacturer requested the services of NPS to expand on their existing airline for a new factory. This company has been in operation since 1990 and relocated to Perth in 2003. Due to their continuous growth, they recently required an expansion of their current building. NPS [...]- 1
- 2