Avoid Downtime From Leaks

One of the major cost risks involved in oil and gas production environments is downtime due to rogue emissions or leaks
from process systems.

Helium has been proven to find a leak path more easily and reliably than other gases or water, due to its small molecular size.Gas Booster

The Hydratron Helium Booster unit ensures that all leaks can be found at normal system operating pressures, as well as rendering the internal atmosphere inert and with a low dew point, reducing the risk of corrosion and hydrate formation.

The booster unit provides a controlled constant helium injection pressure into the nitrogen stream to achieve the required mix in the test piece.

Features:

  • Designed for leak testing applications, in which the user is testing typically with a 99% nitrogen/1% helium mix
  • Robust, compact, easily stackable stainless steel frame
  • Stainless steel colour coded mimic panel with mounted control (including air drive regulator, inlet gas supply regulator, pressure maintaining valve by-pass and gas pressure release valve)
  • Air and gas gauges fitted on a sloping panel for easy reference
  • Receives gas from any supply and compresses it to a higher pressure for leak testing, pressure testing and gas transfer
  • Features Hydratron’s high flow rate, air driven gas booster models, with typical output pressures of up to 14,200 psi

 

If you would like to discover how Hydratron’s Helium Booster can assist in your project, call us on 1300 290 638 or email our High Pressure expert here!

 

Improve Turnaround Time on Valve Testing

Hydratron’s Valve Test Bench

Utilising both fluid and gas as the test mediums, Hydratron’s Safety Relief Valve Test Bench is suitable for testing 1/2” – 10” RF, and 1/4” – 2” screwed relief valves at pressures of up to 10,000psi.

With a four finger, fully adjustable hydraulic clamping system, Hydratron’s Valve Test Bench guarantees to improve turnaround time on valve testing.

Features:

• Hydraulic test system, with AZ-1 series air operated hydraulic pump, accumulator isolation valve, pressure release valve and safety relief valves

• Nitrogen/air test system, with GB’S series air operated gas booster pump, inlet gas bulkhead connector threaded 1/4” NPT female, gas stop valve and gas filter

• Hydraulic clamping system comprising four finger type, fully adjustable clamps, capable of a combined clamping force of 75 tonnes

• An interlocking system, preventing pressure from being introduced into the valve under test until the valve is securely clamped in place

• Additional controls including nitrogen or air/water selector, high pressure fine metering valve, pressure release valve and test gauge bulkhead fitting threaded 1/2” BSP female

 


 

Would you like more information?

Call us on 1300 290 638 or email us here! Alternatively, you can download the brochure [PDF] for future reference.

In-page Images_200x200_Valve Test Bench3
In-page Images_200x200_Valve Test Bench
In-page Images_200x200_Valve Test Bench2
In-page Images_200x200_Valve Test Bench Clamps