Venti: Bringing Italian compressed air excellence to Australia

The Venti Compack Smart series brings industrial-level performance to fields that have traditionally relied on piston compressors. By integrating the advanced technology of a screw compressor, Compack delivers greater efficiency, reliability, and energy savings.

With an intelligent electronic control system, the Compack Smart series automatically manages loading and unloading cycles, optimising performance and reducing waste.

An integrated heating system eliminates condensate issues, ensuring smooth operation even in systems with non-continuous use.

Compack Smart compressors provide the same air output as a piston compressor while consuming less energy — delivering cost savings without compromising performance.

Upgrade to smarter, more efficient compressed air technology with Compack Smart.

Technical features

• 2.7 – 4 kW
• Fixed speed – direct drive 1:1
• Direct coupling
• Integrated airend
• Electronic controller
• Anti-condensate system
• Constant and immediate air flow with no tanks required
• Compact design
• Designed as an industrial compressor
• Fast and economical maintenance
• Low energy costs
• Exceptionally quiet

Compack Smart 2.7 – 4 kW series models

The Compack Smart series is available in the following models:

• On horizontal tank (2.5L and 90L)
• On horizontal tank with dryer
• On vertical tank
• Air trolley
• Tandem-controller/agent on 500L tank

Equipped with the latest generation airend technology, the Venti Compack Easy, Twin and VSD 5-7 series of screw compressors is efficient, reliable and quiet.

Available in fixed speed and variable speed drive models, this range integrates the main components of a screw compressor – the airend unit, separation sump, thermostatic valve, MPV, intake valve, high precision steel rotors and bearings, all contained in a compact aluminium body.

Ideal for small industries, the Compack range offers significant advantages over piston compressors in terms of running costs, sustainability, performance, and reliability.

Technical features

• 5.5 – 7.5 kW
• Belt drive
• Fixed and variable speed drive models
• All inclusive system, fully integrated in aluminium case
• New generation VMC airend
• VMC suction and thermostatic valve
• Free Air Delivery (FAD)
• Efficient cooling system
• Superior performance with lower power consumption compared to a piston compressor
• Greater energy efficiency with limited CO2 emissions
• Lower sound level than a piston compressor
• Continuous operation
• Simple to operate and manage
• Control with pressure switch (Easy models) or electronic controller with load/unload system (Twin models)
• KTRONIC 10 available on VSD version with variable speed inverter drive (twin). KTRONIC 8 available on on-off version

Compack Easy, Twin & VSD – 5-7 kW series models

The Compack 5-7 series is available in the following models:

• Grounded – compressor, stand alone
• With dryer – compressor and dryer
• Tank mounted – compressor mounted on a 270 or 500 L tank
• Full feature – compressor, dryer and receiver

Venti’s KME VSD is a professional series of heavy duty workshop compressors engineered for reliability and performance. They offer exceptional energy efficiency, a compact design, and quiet operations across a wide range of working conditions.

The 1:1 direct-drive design connects the airend and motor via an elastic coupling, reducing energy consumption, maintenance costs, and noise.

With a compact footprint, easy installation, and preassembled dryers and tanks, these compressors offer space-saving benefits, eliminate the need for additional installation work, and prevent air leaks, providing significant cost savings.

Technical features

• 7.5 – 15 kW
• Direct coupling
• Variable Speed Drive
• Electronic controller K-Tronic 10
• Latest generation electric motor
• Frequency inverter
• High efficiency and low noise cooling electric fan
• Direct drive 1:1 white elastic coupling element
• Pack Smart V76C – V90C

Professional KME VSD 7-15 series models

The Professional KME VSD 7-15 series is available in the following models:

• grounded – compressor only
• with refrigeration dryer – compressor and dryer
• tank mounted – tank options: 270/500 L, according to size
• full feature – compressor, receiver, dryer and filters

Venti’s KME C Plus is an industrial series of belt-driven screw compressors offering low installation and management costs, with excellent performance, especially in applications requiring continuous service.

Easily manage all functions with the intuitive, user friendly controller.

With a compact footprint, easy installation, and preassembled dryers and tanks, these compressors offer space-saving benefits, eliminate the need for additional installation work, and prevent air leaks, providing significant cost savings.

Technical features

• 7.5 – 55 kW
• Belt drive
• Pack Smart VMC
• Electronic KTRONIC 10P control (KTRONIC 100P optional)
• Latest generation Star-Delta electric motor (made in Italy)
• Ultra-quiet and efficient electric fan paired with thermostatic valve for optimal performance
• Poly-V belt transmission

Industrial KME C Plus 7-55 series models

The Industrial KME C Plus 7-55 series is available in the following models:

• grounded
• grounded with dryer
• on tank
• on tank with dryer

Venti’s KLE Plus is an industrial range of direct-drive, inverter compressors offering exceptional reliability, compact design, energy efficiency, and quiet operation under all conditions.

Featuring direct transmission, advanced separation tanks, and high-efficiency motors, the KLE Plus delivers significant advantages, including:

• Simplified operation and management
• Exceptional reliability
• Energy savings
• Ultra-quiet performance
• Reduced maintenance costs

With intelligent technology, the KLE Plus minimises energy costs by adjusting the motor’s RPM, and the airend speed, to match the precise air demand of your operations, all while maintaining a consistent air pressure.

Technical features

• 15 – 55 kW
• Direct coupling
• Variable Speed Drive
• Pack Smart V90-V110-V130-V150
• K-tronic 100 touchscreen controller (optional)
• High performance electric motor: premium efficiency
• Variable speed drive motor control
• High efficiency, low-noise cooling fan
• Easy access for quick maintenance
• Oil resistant soundproof panels
• Oversized air-oil heat exchanger
• Aftercooler condense separator (37-45-55 kW)

Venti’s Heavy Industrial, single stage rotary screw compressors are available in DCT (Fixed speed, single-stage rotary screw compressors with direct transmission) and DCT VSD (variable speed, single-stage rotary screw compressors with direct transmission).

Technical features

• 75 – 315 kW
• DCT and DCT VSD series offers energy efficiency and reliability for industrial use
• Airend engineered for efficiency and durability – the optimised rotor profile, designed with cutting-edge fluid dynamics, minimises pressure drops within the system. This reduces energy consumption by 8%, delivering better power output.
• Low rotation speeds extend the service life of the bearings, ensuring long-term reliability and performance.
• The use of a low-speed motor (4/6 poles in the fixed-speed version) combined with appropriately sized rotary screws (max 1400rpm) ensures extended bearing life.
• Speed control allows for precise detection of working pressure and motor speed, ensuring the optimal flow rate based on actual air demand, which results in significant energy savings.
• The user-friendly KTronic 1000 touch screen panel provides full access to all functions, parameter settings, and diagnostics, helping to boost the compressor’s efficiency. It can also connect to a local area network (LAN), enabling you to monitor and manage the compressor from a remote PC or mobile device.
• The cooling system features separate, individually managed coolers for air-to-air and air-to-oil systems, ensuring precise temperature regulation.

Venti’s Heavy Industrial, two stage rotary screw compressors are available in DCT 2S and DCT 2S VSD with Variable Speed Drive.

Technical features

• 55 – 355 kW
• 2S DCT and 2S DCT VSD series offering energy efficiency and reliability for industrial use
• Venti’s two-stage screw units offer up to 15% energy savings compared to single stage screw units.
• Increased output
• Better power efficiency (kW/m3/min)
• Lower oil temperature between the first and second stages enhances the efficiency of the screw unit
• Low rotation speed allows for long bearing life.
• The use of a low-speed motor (4/6 poles in the fixed-speed version) combined with appropriately sized rotary screws (max 1500 rpm) ensures extended bearing life.
• Speed control allows for precise detection of working pressure and motor speed, ensuring the optimal flow rate based on actual air demand, which results in significant energy savings.
• User-friendly KTronic 1000 touch screen panel provides full access to all functions, parameter settings, and diagnostics, helping to boost the compressor’s efficiency. it can also connect to a local area network (LAN), enabling you to monitor and manage the compressor from a remote PC or mobile device.
• Variable Speed Drive (VSD) range is designed and sized to operate at a 100% duty cycle, even under the most demanding conditions, while maintaining energy efficiency through an inverter-controlled fan for the oil cooler.
• The compressor’s easily removable external panels allow for convenient access to components requiring routine maintenance.
• The air-oil separator cartridge can also be quickly replaced by simply rotating the tank lid, without the need for disassembly.

Venti KDE series refrigeration dryers are designed to be compact, efficient and easy to install with minimal maintenance.

Equipped with a user-friendly digital electronic controller, Venti dryers control and maintain dew points, allowing for timed condensation downloads. They also offer real-time viewing of operating conditions.

With a one-year warranty, the Venti dryer series handles airflow rates from 14 CFM to 2,862 CFM and delivers excellent performance, even in challenging environments with high inlet air temperatures.

Technical features

• User-friendly digital controller
• Timed condensation downloads
• Handles air flow rates from 14 to 2,862 CFM
• Control and maintain dew points
• Real-time viewing of operating conditions
• Excellent performance in all environments