Advantages of Aluminium Pipe in Compressed Air Systems

 

Advantages of Aluminium Pipe. The Australian compressed air industry has long been dominated by plastic and galvanised steel piping products – materials borrowed from allied industries such as the building and plumbing sectors. Traditionally, engineers and contractors have consistently specified such systems due to low material costs, familiarity and most of all, out of habit.

 

Recently, due to the tightening of workplace health & safety regulations, Australian standards, and a shift in industry thinking, advancements have been developing; possibly the most significant of which being the development of piping systems specifically designed for the purpose of compressed air distribution. Introducing aluminium compressed air piping.

 

Aluminium piping was introduced into the industry during the late 1980s as an alternative to plastic and steel, however, it has remained relatively underutilised and unappreciated until now. This article explores the various differences between aluminium and plastic pipe, and the clear advantages that can be seen from an all metal system.

 

1. Aluminium allows for better flow rates.

Aluminium Pipe

 

When comparing the internal diameter of aluminium with plastic pipe of the same outer diameter, you will find one large and obvious advantage. The significantly thinner, yet more rigid wall of aluminium provides a much larger internal diameter, resulting in far greater flow rates and reduced pressure drop compared to plastic of the same size. As such, it is possible in many cases to drop down one pipe size when utilising aluminium, subsequently saving on material costs, while still achieving the same or better flow as plastic.

Additionally, the leak-free seal created by Infinity aluminium, airline system fittings, coupled with the smooth bore of the internal pipe surface leaves virtually no lip to cause turbulence and disrupt laminar flow.

 

2. Aluminium can withstand extreme conditions

shutterstock_113835_265x177

 

Aluminium piping has proven to exhibit far superior climatic resistance to that of plastic. Unaffected by sunlight, aluminium presents extreme fire resistance and is able to maintain a consistent 16 bar working pressure at temperatures up to 80°C. In comparison, the integrity of plastic piping can become compromised due to prolonged sun exposure, offering minimal fire resistance, and experiencing a significant drop in maximum pressure rating when temperatures increase.

 

If installed correctly, the non-corrosive nature of aluminium means that the compressed air network will operate efficiently for far longer than any traditional alternative.

 

3. Aluminium does not expand or contract

plastic_aluminium_expansion_265x177

 

Due to its heat resistant composition, aluminium presents very minimal expansion and contraction upon extreme shifts in temperature. Plastic, on the other hand, has shown to expand up to as much as 50mm for every 100m of pipe, resulting in substantial buckling of the entire ring main system.

 

In addition, while plastic is prone to sagging and bowing due to heat expansion, aluminium maintains its form, meaningless clips are needed during installation to preserve the long-term structure of the system.

 

4. Installation is quick and simple

in-pm2013-2_264x176

 

The rigid nature of aluminium prevents it from bowing and sagging, meaning that even at long lengths, it requires fewer clips (every 2-3m) and it is possible for just one technician to connect. During installation, manipulation of the pipe is easy, however once bent, it will hold its shape.

 

Plastic piping, on the other hand, takes more time and manpower to install, resulting in far higher labour costs. Prone to substantial sagging, more clips are required to maintain structure, and extra fittings are required to bend the pipe and keep it in shape.

 

The rise of aluminium compressed air systems in today’s market underlines it as the way of the future for air distribution. While initial capital cost may be higher than that of plastic, the long-term savings in installation, maintenance and output places aluminium at the forefront of the industry.

 


 

Nessco Pressure Systems uses Infinity Aluminium Piping when installing compressed air systems. To discover more about the Infinity Aluminium Pipe and how it can benefit your compressed air system, call 1300 290 638 or email info@nesscopressure.com.au